|
Installing a Ceiling Fan
1. You need a fan speed control switch to control a ceiling fan.
2. If the fan does not come with a light, you can purchase a light kit and install both at the same time.
3. Never attach a fan to a plain ceiling box. The fan's weight will pull it out of the ceiling.
#1 Prepare the area
Turn off power to existing light fixture
Remove light fixture
Remove ceiling box
Thread existing wiring into new ceiling box
Screw new metal box to ceiling joist
- Screwdriver
- Ladder
- Step stool
- Drill
- Screwdriver bits
- Metal ceiling box
#2 Install support brace between joists
Place brace through the existing hole in ceiling
Rest feet of brace on top side of ceiling
Turn support bar to tighten against joists above ceiling
Attach the u-bolt connector to brace bar
Thread existing wiring into new ceiling box
Screw new ceiling box in place
- Fan support brace
- Adjustable wrench
- Open end wrenches
- Ratchet
- Sockets
- Utility knife
- Safety goggles
- Gloves
#3 Assemble ceiling fan
Follow manufacturer's instructions for assembly
- Manufacturer's instructions
#4 Install ceiling fan
Mount fan anchor bracket to ceiling box
Attach fan to bracket
Connect power and ground wires to fan and secure with wire nuts and tape
Screw decorative cover to box
#5 Finishing touches
Replace light switch with a fan control switch
Turn on power
Test fan and light by trying all speeds and light
- Fan control switch
- Switch plate cover
|
